[argyllcms] Re: EyeOne Rev B. doesn't walk
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Tue, 19 Aug 2008 23:59:16 +1000
Marco N. wrote:
I use Leopard. I try to follow these instructions but nothing to do
spotread -D:
spotread: Error - icoms - set_ser_port: port number out of range!
If you do a
spotread -?
what instruments or serial ports does it list ?
If it just lists
** No ports found **
after -c, then this means that there are no USB instruments that Argyll
recognizes plugged in, and that there are no serial ports on the computer.
Is your instrument a rev. B ?
Are you running any other software on that computer that accesses the
instrument, and if so what ? Does it successfully see the instrument ?
Is the instrument plugged into the computer directly, or is it via some
sort of hub or via a keyboard or display ?
What sort of Mac is it ?
Graeme Gill.
Other related posts:
