[THIN] Re: Upgrading from 10.2 Citrix client is ignoring file security settings in webica.ini
- From: Dogers <dogers@xxxxxxxxx>
- To: thin@xxxxxxxxxxxxx
- Date: Thu, 13 Jan 2011 13:23:32 +0000
Jeremy, are you sure that's the right article number? It appears to be about
netscaler interface tagging!
Andrew
On 13 Jan 2011 08:04, "Jeremy (J House Consulting)" <
jeremy@xxxxxxxxxxxxxxxxxxxx> wrote:
> Hey Andy,
>
>
>
> Have you seen CTX122921?
>
>
>
> Cheers,
>
> Jeremy.
>
>
>
> From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf
> Of andy mac
> Sent: Tuesday, 11 January 2011 5:11 PM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] Re: Upgrading from 10.2 Citrix client is ignoring file
> security settings in webica.ini
>
>
>
> No firefox on the affected servers unfortunately. Ive tested the same
> clients on a couple of servers with just xenapp 5 and a few office apps
on,
> and the same thing still happens, but ive installed excatly the same
clients
> on a couple of 2003 DC's, and all drive mappings work fine. Im gonna
> uninstall Citrix from my test server today to see if that makes any
> difference. I'll post the results either way.
>
>
>
> Andy
>
>
>
> _____
>
> From: Jim Kenzig <jkenzig@xxxxxxxxx>
> To: thin@xxxxxxxxxxxxx
> Sent: Mon, 10 January, 2011 21:54:44
> Subject: [THIN] Re: Upgrading from 10.2 Citrix client is ignoring file
> security settings in webica.ini
>
> Have you installed Firefox on the servers? I have had severe weirdness if
FF
> is installed. Uninstall FF, and try to reinstall the client if that is the
> issue and it should work. You could mess in the registry and just delete
> the FF keys but the easiest way is to uninstall it completely then
reinstall
> it.
> Jim Kenzig
> <http://www.kenzig.com/> http://www.kenzig.com
>
>
>
>
> On Fri, Jan 7, 2011 at 6:37 AM, andy mac <a_r_mc789@xxxxxxxxx> wrote:
>
> Ive got a couple of Windows 2003 servers that im rolling out the new 12.1
> client to, which is upgrading from the 10.2 client.
>
>
>
> The 2 servers are logging onto a PS4 farm, and with the 10.2 client, the
> file security has been working fine. However, after upgrading to the new
> client, its now totally ignoring the settings in the webica.ini. It now
> defaults to 'ask permission' but never does, and all the client drive
> mappings now dont work. Its also the same with the 11.2 client
>
>
>
> Ive rolled back to the 10.2 client and all works ok. Has anyone had this?
> the hundreds of client machines ive upgraded so far have been fine, its
just
> these 2 w2k3 servers that are having the problem
>
>
>
> Thanks
>
>
>
> Andy
>
>
>
>
>
>
>
>
>
Other related posts:
