Is this a DV or PRJO? You need to provide complete model and chassis numbers. Country TV Ron Miller Inez, TX. 77968 ----- Original Message ----- From: "Warren" <warrenca@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, March 04, 2005 9:47 PM Subject: [TechAssist] Projo RCA CTC169 Dead with wrong standby voltages > Hi all! > > I will list the work so far: > > 15 V standby = 14.2 > 5V standby =4.9V > Raw B+=151V > Regulated B+ is too high I think ...The meter does not like the signal > at TP4101 some times 197V sometimes 1.97V?? > Should the Reg B+ be 143V before turn on???? > From cathode of CR4106 to Cathode of CR4101 first I had 2 Volts.... Now > after changing diodes I get 3 volts??? > Should be under 1 Volt. > > Installed a startup kit from Global Q4101, U4101, C4102, C4118, C4108 > (47uf) which also was a 47UF before. > My schematic shows 39uf ?? does this make a difference?? > Caps were installed first with Q4101 , IC U4101 was installed > afterwards. > Also changed C4104(15uf) with also no change. > I also tried to isolate the H out (curiosity) - no change > > I've read many tips but most of these point to the parts that I've > already changed. > Can someone brush up my 169 skills. > What am I missing?? > Does anyone have a troubleshooting flow chart for the 169?? This would > help. > > BTW when you push the on button you can see the front led give a slight > single blink. > > TIA all ! > All tips and comments welcome. > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/