[TechAssist] Re: PTK169 - Pic flashing on/off
- From: "Dan Garris" <dgarris@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 09 Jul 2004 16:18:37 -0400
I've done several of these in the past with no problems, I have tried
several attempts to be sure the wires are seated properly on this repair. Is
there something else that could be causing this flashing on/off picture -OR-
is it definitely a common "Not making contact" problem on the HV splitter,
I'll keep trying to resecure the anodes, and report back. Any comments!
Dan Garris
Garris TV
New Bern, NC
dgarris@xxxxxxxxxxx
>From: "Wayne Vanaman" <Wayne@xxxxxxxxxxxxxxxxxxxxx>
>Reply-To: techassist@xxxxxxxxxxxxx
>To: <techassist@xxxxxxxxxxxxx>
>Subject: [TechAssist] Re: PTK169 - Pic flashing on/off
>Date: Fri, 9 Jul 2004 14:11:17 -0500
>
>You have a kink in one or more of the HV leads in the splitter. Pull the
>leads back out and remove the splitter. Take a section of scrap HV cable a
>strip it back about 1/4 inch. Probe the chimney slowly and you will find
>the bottom, then very easily press in and you will feel the lead seat. Do
>this a few times until you get the feel of it. If the lead kinks if feels
>a
>little different. Examine the lead after each try. A couple of min
>practice like this until you learn the feel will save lots and lots of time
>and frustration.
>
>Wayne Vanaman
>Omega Electronics
>6904 W Fairfield Dr
>Pensacola, Fl. 32506-3310
>
>Wayne@xxxxxxxxxxxxxxxxxxxxx
>WWW.PensacolaTVRepair.Com
>
>850-456-5995 voice
>850-458-6369 fax
>
>
>----- Original Message -----
>From: "Danny Garris" <dgarris@xxxxxxxxxxx>
>To: <techassist@xxxxxxxxxxxxx>
>Sent: Friday, July 09, 2004 2:06 PM
>Subject: [TechAssist] PTK169 - Pic flashing on/off
>
>
> > Hi Fellow techs,
> >
> > Just replaced bad #205064 HV Trippler in this RCA PTK169PFA (model RCA
> > P46720LV) Chassis. Now the set will come on, and all (3) color guns are
> > working, But the picture is Flashing on/off. Can hear a slight
>"clicking"
> > noise coming from the set as the picture flashes on and off in a 1
>second
> > cycle.
> >
> > Any Help? All I have done is replace the trippler.
> >
> > Dan Garris
> > Garris TV
> > New Bern, NC
> > (252) 638-4477
> > DGarris@xxxxxxxxxxx
> >
> >
> >
> >
>--------------------------------------------------------------------------
>---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
>
>-----------------------------------------------------------------------------
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
