The status button should increase the values and the mute button decrease. Note that you change height with the channel + and -. To exit and save ( from page H) press the smart button on the remote. Also remember on page A there is S-correct and center correct. Use volume + / - to select parameter and Ch + / - to change the value. No effect will be seen in the picture until you go on to the next parameter. Press menu to save, press 9 to go to page I, and press volume + to exit service mode. Remove AC power and reapply to complete the save. It is really a strange service mode and takes a little practice and experementation. John. John Mielke Main TV 636 main St. Longmont, Co phone 303 776 6955 fax 303 776 0792 maintv2004@xxxxxxxxxxx ----- Original Message ----- From: "Jon Garver" <jongar@xxxxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Friday, July 09, 2004 1:58 PM Subject: [TechAssist] Philips B8 chassis VSLOPE Adjustment Question > My question is, what button is used on the smart remote to > adjust the VSLOPE value higher? The "mute" button lowers the > value but can't find one the one to increase it. The current > value is 17. > > I had to replace the EEPROM. Everything appears to be OK except > that I need to bring the picture down about 2". > > First time that I have tried to adjust anything in a Philips > service menu and don't have the manual for it. > > Thanks, > > Jon Garver > Heritage Television Service > 204 Heritage Rd. > Monticello, Indiana U.S.A. > 574-583-9681 Voice & FAX > jongar@xxxxxxxxxxxxx or > htv1@xxxxxxxxx (for file u.l.) > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/