Awesome Denis. I think that's what I'll use for the rest of the interior when I'm done. Sounds like great stuff for sure! Denis wrote: > I sprayed it with a regular HVLP gun. www.rustbullet.com/ > > > > ----- Original Message ----- From: "Eric Woodall" <eric@xxxxxxxxxxxxxx> > To: <tcb@xxxxxxxxxxxxx> > Sent: Monday, February 23, 2009 10:05 AM > Subject: [tcb] Re: Rust.... preventative > > >> Did you spray with a spray gun, or aerosol can? >> >> Denis wrote: >>> I tell people over and over about Rust Bullet, the stuff is great. All >>> the prep you need to do is to clear off the loose rust that is going >>> to flake off, you do not need to clean to bare metal. It comes in >>> silver or black. It has a high volume of aluminum. I sprayed it on >>> Murray's interior, including the floor and then, stupidly put down >>> like a carpet pad and then the wood floor. After the tree incident I >>> pulled up the floor and it was very wet under it. It had been wet >>> forever under there for years and the floor had only the tiniest wisps >>> of rust. >>> >>> >>> >>> >>> >>> ----- Original Message ----- From: "Eric Woodall" <eric@xxxxxxxxxxxxxx> >>> To: <tcb@xxxxxxxxxxxxx> >>> Sent: Monday, February 23, 2009 9:12 AM >>> Subject: [tcb] Re: Rust.... preventative >>> >>> >>>> Thanks sammie. >>>> I've read Lee's article several times. >>>> Basically what he is saying is that they are all a crock of $h1T in >>>> regards to "encapsulation". >>>> So, probably my best bet is to either get some master's series, or >>>> some >>>> rustoleum spray paint. >>>> I really need something that is in an aerosol can, to spray the inside >>>> of the rocker assembly. >>>> Mainly I just wanted to see if you guys were familiar with any >>>> products >>>> that maybe nobody else has. >>>> I just mainly don't want to be redoing this in another 10 years... >>>> >>>> >>>> sammie smith wrote: >>>>> Go here. >>>>> http://www.thesamba.com/vw/forum/viewtopic.php?t=131753 >>>>> >>>>> --- On *Sun, 2/22/09, Eric Woodall /<eric@xxxxxxxxxxxxxx>/* wrote: >>>>> >>>>> From: Eric Woodall <eric@xxxxxxxxxxxxxx> >>>>> Subject: [tcb] Rust.... preventative >>>>> To: "Texas Coalition of Buses" <tcb@xxxxxxxxxxxxx> >>>>> Date: Sunday, February 22, 2009, 2:02 PM >>>>> >>>>> Hey bus lovers, >>>>> I am about to do some rust work on my bus and I have some >>>>> questions. >>>>> The first thing I'm going to do is the short rocker under the >>>>> cargo doors. >>>>> I bought an assembled piece for Kelly (metalwizard) several >>>>> years ago, >>>>> but the inner part is not painted or anything. >>>>> I need a rust preventative that I can get locally (preferred) >>>>> that I can >>>>> spray, or pour into one end of the rocker assembly, and coat the >>>>> inside. >>>>> The goal here is to not have to do this again in 10 years. >>>>> Something like POR-15 won't work because of the priming of the >>>>> metal, etc. >>>>> So what's the verdict? >>>>> Thanks! >>>>> Eric >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >> >> >> > > >