[tcb] Re: Murray fire was caused by... BRIAN!
- From: Stephen Brannan <ozarkcycleworks@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Sat, 23 Feb 2008 21:13:24 -0800 (PST)
Was it Chuck's fault that your headlight almost fell out today or are you
blaming Brian as well? The guy that saw it is Jack.
Denis Dodson <coocoo@xxxxxxx> wrote: Poor Chuck
----- Original Message -----
From: "chuck blue"
To:
Sent: Saturday, February 23, 2008 8:47 AM
Subject: [tcb] Re: Murray fire was caused by... BRIAN!
> Denis,Are you getting all of this?
> Kat, He didn't send me home with SH.... But he did say thank you.
> ----- Original Message -----
> From: "Katrina"
> To:
> Sent: Friday, February 22, 2008 3:38 PM
> Subject: [tcb] Re: Murray fire was caused by... BRIAN!
>
>
>>I hope you sent Chuck home with a HUGE primerib or at least a Chocolate
>>Souffle'.
>>
>> Katrina & Dan Martin
>> 71'bus "Homer"
>> http://web.mac.com/danandkatrinamartin/
>> http://ical.mac.com/danandkatrinamartin/Volks32Shows
>>
>>
>> On Friday, February 22, 2008, at 11:36AM, "Denis Dodson"
>> wrote:
>>>Not really, but it sounds like some of his letters and I just wanted to
>>>imagine him jumping.
>>>
>>>Chuck has inspected the damage and decided that I "pinched" a wire when I
>>>installed the new speedometer, which made him mad so he abused me for
>>>about two hours. Like if I got a drink of water, "I don't need to be
>>>doing this! I can go home right now" or if he asked, specifically, for a
>>>three inch small Phillips screwdriver and I couldn't find it within 2
>>>minutes "You know, if you went all around here and put all your tools in
>>>the same place, I wouldn't be here wasting all my time, you miserable
>>>faggot!" And Andrew called and left a message in voicemail that what was
>>>I doing while Chuck was working on Murray, that piece of s#*t." That is
>>>an actual quote from Andrew Barnes. I think Chuck called him. He fixed up
>>>all the electrical, even the horn, so now everything works. Or will until
>>>the next wire fire, damn that Brian.
>>>
>>>We took the brake drums to two O'Rielly's but none of them could turn the
>>>rear drums, which are Thing or Type 3, because of the small splined hole
>>>and ended up at a very cool machine shop that charged me $15 a piece and
>>>although they looked perfect, were slightly out of round (Chuck right
>>>again).
>>>
>>>Oh, and the sway bar company that was still in business? I called their
>>>tech support line and left a message that it didn't fit because I had
>>>removed the RGBs, and I got a call back from a guy that sounded about 25
>>>asking about what we were doing and where had we found this kit. He
>>>wanted to know the colors of the pieces, whether there were any yellow
>>>zinc parts. He decided that the kit was between 25 to thirty years old,
>>>and was amazed.
>>>
>>>Chuck left for home this morning.
>>>
>>>Today I will re-assemble the brakes.
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.516 / Virus Database: 269.20.9/1294 - Release Date:
>> 2/22/2008 6:39 PM
>>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition. Version: 7.5.516 / Virus Database:
> 269.20.9/1293 - Release Date: 2/22/2008 9:21 AM
>
>
---------------------------------
Never miss a thing. Make Yahoo your homepage.
Other related posts:
