[tcb] Murray fire was caused by... BRIAN!
- From: "Denis Dodson" <coocoo@xxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Fri, 22 Feb 2008 11:33:57 -0600
Not really, but it sounds like some of his letters and I just wanted to imagine
him jumping.
Chuck has inspected the damage and decided that I "pinched" a wire when I
installed the new speedometer, which made him mad so he abused me for about two
hours. Like if I got a drink of water, "I don't need to be doing this! I can go
home right now" or if he asked, specifically, for a three inch small Phillips
screwdriver and I couldn't find it within 2 minutes "You know, if you went all
around here and put all your tools in the same place, I wouldn't be here
wasting all my time, you miserable faggot!" And Andrew called and left a
message in voicemail that what was I doing while Chuck was working on Murray,
that piece of s#*t." That is an actual quote from Andrew Barnes. I think Chuck
called him. He fixed up all the electrical, even the horn, so now everything
works. Or will until the next wire fire, damn that Brian.
We took the brake drums to two O'Rielly's but none of them could turn the rear
drums, which are Thing or Type 3, because of the small splined hole and ended
up at a very cool machine shop that charged me $15 a piece and although they
looked perfect, were slightly out of round (Chuck right again).
Oh, and the sway bar company that was still in business? I called their tech
support line and left a message that it didn't fit because I had removed the
RGBs, and I got a call back from a guy that sounded about 25 asking about what
we were doing and where had we found this kit. He wanted to know the colors of
the pieces, whether there were any yellow zinc parts. He decided that the kit
was between 25 to thirty years old, and was amazed.
Chuck left for home this morning.
Today I will re-assemble the brakes.
Other related posts:
