[SI-LIST] (no subject)
- From: ravi <ravi@xxxxxxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Wed, 27 Oct 2004 12:35:18 +0530
Hello,
On mixed signal boards where there are multiple ADC's is it correct to
take a common reference (Ground) plane for all these data converters.
Each of the ADC's get their input from different analog systems. Incase,
a single analog ground is used the ground noise on any of these systems
will affect the ground reference for other data converters on the board.
How is a situation like this typically handled.
Thanks,
Ravi
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
