Hi all, We have a 1394 PHY core implemented in a FPGA which gives out the required singled ended signals. Now we need a analog translator to convert these signals to 1394 differential signalling range(min:170mv, max:265mv)to transmit over the 1394 cable. Is there any differntial driver and receiver available with the above mentioned signalling range which can operate upto 400Mbps? Regards Ashok -- Attached file included as plaintext by Listar -- -- File: Wipro_Disclaimer.txt **************************Disclaimer************************************ Information contained in this E-MAIL being proprietary to Wipro Limited is 'privileged' and 'confidential' and intended for use only by the individual or entity to which it is addressed. You are notified that any use, copying or dissemination of the information contained in the E-MAIL in any manner whatsoever is strictly prohibited. ******************************************************************** ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu