Hello, Would someone out of here please reccomend me the solution of following problem. I am designing the Compact PCI board, and do not have an opportunity to use double width bracket. Thus the area on bracket, that I can occupy with interface connectors, is 214 X 15 mm. But I have to use a large number of connectors, with relatively low number of pins in each of them - 3,6 and 9 pins connectors. The interfaces are LVDS, with rise/fall time about 1nS. I can not use connectors like MDR, because of their length (min length is about 30 mm). The only opportunity to fit the area, is the LEMO or FISCHER nulti-pole ROUND connectors ( PCB mount 90 deg receiptacle). But I do not know, which impedance discontinuity they cause... Thus my quistions are: - Have someone the experience in using round connectors for high speed differential interfaces (LVDS)? - Can someone recommend some alternative (i.e. high-speed low pin count (3,6,9) connectors shorter then MDR? ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu