[SI-LIST]
- From: cher_rowland@xxxxxxxxxxx
- To: si-list@xxxxxxxxxxxxx
- Date: Thu, 1 Aug 2002 16:21:27 -0600
Has anyone on the list had a chance to check out the UltraCad book mentioned
below, "Signal Integrity Issues in PCB Design"? I'd be interested in reviews.
Cheers,
Cher
-----Original Message-----
From: Doug Brooks [mailto:doug@xxxxxxxxxx]
Sent: Wednesday, July 31, 2002 4:23 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Layout service recommendations
We'd simply like to make the plug that UltraCAD would LOVE to have the
opportunity to quote some of the boards the rest of you need designed. The
fact that we know how to do high speed designs we hope is evident from our
publications!
Check out our latest BOOK, "Signal Integrity Issues in PCB Design"
available through our web site.
Doug Brooks
At 02:57 PM 7/31/2002 -0700, Martin Euredjian wrote:
>Being almost ready to go to layout I've been thinking about the issues of
>sending a design out to a service bureau instead of doing it in-house.
>Unless you work for a large corporation (I don't) you might not have access
>to the $100K+ EDA tools and support infrastructure (budget, bodies,
>equipment, etc.) you might need to produce good designs that work "out of
>the box".
>
>My particular design is a small 5x7 in board that has a 1.5Gb/s front end
>which gets deserialized and fed into FPGA's etc. Most internal frequencies
>are in the 100 to 200 MHz range, with wide busses.
>
>Is it reasonable to assume that a good layout service can get this right the
>first time? What should one look for? Are there any rules-of-thumb in
>terms of cost? What guarantees should one demand? What should be the
>hand-off process? What's the best way to assure success?
>
>Much like the list of recommended PCB houses, it might be nice to assemble a
>list of high-speed-capable layout service houses. I'll volunteer to compile
>and post to this list.
>
>Thank you,
>
>
>===============================
> Martin Euredjian
> eCinema Systems, Inc.
> voice: 661-305-9320
> fax: 661-775-4876
> martin@xxxxxxxxxxxxxx
> www.ecinemasys.com
>===============================
>
>
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at:
> //www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
_______________________________________________________________________________
UltraCAD Design announces availability of its new book "Signal Integrity
Issues in PCB Design"
Details at www.ultracad.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
