[SI-LIST] Why Termination at Both End ?
- From: Rajan Hansa <all.si.list@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 9 Aug 2011 13:56:52 +0530
Experts,
Can anyone explain that why in some designs we see source as well as load
terminations, I mean termination at both side of traces ? If ringing is a
issue then only source termination should be sufficient to control it and we
can use a receiver with very high input impedance i.e. no need to match
input impedance of receiver with transmission line characteristics
impedance.
Rajan
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
