I was watching a webinar by Mentor on Hyperlynx and how they can quickly generate a prbs pattern that results in a worse case eye diagram. They said without this feature it could take days or even years of simulation to do this. I do most of my simulation in hspice since most of my models are based in Hspice. Is there a way to do what Mentor is claiming in Hspice by generating a certain pattern? I have been using the following code for a prbs sequence: vin inr vcm LFSR(0.1 -0.1 1n 5ps 5ps + 'data_rate' 1 [7,4,1] rout=0) vinn innr vcm LFSR(-0.1 0.1 1n 5ps 5ps + 'data_rate' 1 [7,4,1] rout=0) Thanks - Joel ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu