Hi Cristian - Can you add some loss to your design? Best Regards Charles Grasso Compliance Engineer Echostar Communications (w) 303-706-5467 (c) 303-204-2974 (t) 3032042974@xxxxxxxxx (e) charles.grasso@xxxxxxxxxxxx (e2) chasgrasso@xxxxxxxxx -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Cristian Gozzi Sent: Monday, November 21, 2011 8:52 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Damping of Cavity-Mode Resonances in PCB Hi SI expert I'm looking for a good article/paper that describe techniques to reduce or suppress cavity modes in PCB, just by working on plane shape dimension, pwr to gnd dilectric thickness etc. Thanks in advance for your suggestion regards Cris ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu