[rollei_list] Re: MX-EVS Self Timer Sticking...soon after CLA.

  • From: "Jeff Kelley" <thocker@xxxxxxxxxxx>
  • To: rollei_list@xxxxxxxxxxxxx
  • Date: Mon, 17 Jul 2006 13:21:33 -0700

Todd, thanks.

Krikor's paperwork mentions a new mainspring but nothing about the self-timer. Perhaps I was delusional to think he overhauled everything? But...the self timer worked fine when I unpacked the camera after the CLA.

Is the self timer sticking more likely a lubrication problem or a worn spring problem?

Is it a major operation to deal with?

This $20 timer from B&H s probably the least expensive way to deal with it ;)
http://tinyurl.com/on25a



-Jeff-


The self timer should work after months of sitting unused - the same as the shutter. In an MX-EVS, the self timer is a separate unit from the shutter and Krikor most likely did not service the self timer when he service the shutter.


todd




On 17-Jul-06, at 11:37 AM, Jeff Kelley wrote:

I have an MX-EVS with Xenar I bought 6 months ago. It came with a ton of accessories (worth the price alone.)

The slow speeds were sticking and it obviously needed a CLA, so I spent $325 having Krikor Maralian overhaul the thing.
Krikor's site:
http://www.krimarphoto.com/


It came back looking and working great! The self-timer worked fine at that point.

After I put a few rolls through it, to make sure everything was fixed, the camera sat untouched for a couple months.

A couple weeks ago I tried using the self-timer and it was getting stuck part way through the cycle. I can flick the switch and it will continue, however, it may or may not make it to the end of the cycle. Sometimes I have to flick it several times to get it to continue. The shutter still works fine.

I called Krikor and he assured me that letting the camera sit unused for even a few weeks will cause this. He said I should be cyling the self-timer and shutter every one or two weeks.

OK, makes sense, but no matter how many times I cycle the self- timer now, I can't get it to loosen up and work without sticking.

Any of you gurus with knowledge of the innards of the MX-EVS, have an opinion on the above?

Thanks.

- Jeff -


--- Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org

- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list


--- Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org

- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list



---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org

- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list

Other related posts: