[pure-silver] Re: Newbie Bulk Loader mistake
- From: "Justin F. Knotzke" <jknotzke@xxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Fri, 24 Sep 2004 07:53:51 -0400
<quote who = Nick Zentena date=24/09/2004 07:36/>
> Slipping? What's slipping? Do you mean the film is slipping of the
> counter
> gear? If so then all you need to do is make sure the film has engaged the
> gear with the perforations on the film. The Alden is good about counting. If
> you mean something else you'll have to explain.
By slipping I mean that when I crank the film into the cansister,
the reel inside the canister slips on the film and no film loads into
the canister.
> You might want to download the bulk loading FAQ. I think it's written
> for the
> Watson but the loaders are very similar.
I shall do that.
As always Nick, thanks!
J
--
Justin F. Knotzke
jknotzke@xxxxxxxxxx
http://www.shampoo.ca
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
