On 09/24 07:53, Justin F. Knotzke wrote: > > By slipping I mean that when I crank the film into the cansister, > the reel inside the canister slips on the film and no film loads into > the canister. Hmmm, that seems to not make sense. Does canister mean the 35mm film cannister or the bulk loader. I only load my own 35mm film since I don't use it as much as 120mm. Let's go over what you are doing: 1. with bulk film load closed, there should be a little film sticking out 2. tape the end of that film to the inside spool of a 35mm cassette. 3. Add the cassette to that spool 4. insert at the proper place in the bulk film loader 5. close everything 6. open the "gate" so that the bulk film is loose 7. wind the film There should be sprockets so that the film catches. Is that what you mean that is loose? -- Eric aim: maquilingeric ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.