[pure-silver] Re: ADV: Re: Efke R100 Chapter 2: PMK
- From: Tim Daneliuk <tundra@xxxxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Thu, 19 May 2011 10:53:27 -0500
On 5/19/2011 10:47 AM, Dennis Purdy wrote:
> I have never had trouble with the clips but as my processing is done
> on reels in tanks and my agitation is by lifting a rod of reels out
> of the developer and putting it back in I get more turbulence than
> usual in cans (it gives me very even development)
Exactly my method except that I lift *and spin* the reel (against
the direction of the film spiral).
> I have had a problem with the film unwinding off my 120/220 reels.
Me too :)
> I solved that problem by putting 2 rubber bands around each reel. The
> rubber bands don't go on right on the film, but rather around the
> reels the other direction.
This is intriguing but I'm not sure I understand. Can you elaborate
please?
----------------------------------------------------------------------------
Tim Daneliuk tundra@xxxxxxxxxxxxxx
PGP Key: http://www.tundraware.com/PGP/
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
