Hello:
The Vex platform has pieces that bolt together. The robotc was fully
accessible. I used a command line to compile my programs. If I recall
correctly, I used a USB cable to transfer the code. This was in 2007.
Regards,
Robert
-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Tiresias Engineer
Sent: Monday, April 11, 2016 1:01 PM
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] Re: Robotics for the blind
Hello
and how accessible was the Vex platform? regarding both, software and
hardware?
On 4/11/2016 5:46 PM, rjaquiss wrote:
Hello:
Some years ago (2009), I used NXC (Not Exactly c) to program a
Lego Mindstorm. I also had a Vex robot and used Robotc in 2007. As for
the Lego, I was able to operate the control panel to run the program I
compiled. The Lego unit has other functions which are not accessible.
Hope this helps.
Regards,
Robert
-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx
[mailto:program-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Sean Murphy
Sent: Monday, April 11, 2016 2:31 AM
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] Robotics for the blind
Hi
What is peoples experance with robotic programming?
Sean
My experience is the part
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx with the Subject:- faq
