Hi all,
Any particular model of LEGO?
Pranav
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Sean Murphy
Sent: Friday, April 15, 2016 11:45 AM
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] Re: Robotics for the blind
Cool, now I know what I want to get for my birthday. :-)
Sean
On 15 Apr 2016, at 12:56 pm, Andreas Stefik <stefika@xxxxxxxxx
<mailto:stefika@xxxxxxxxx> > wrote:
Hey Sean,
All else being equal, LEGO is probably the easiest I've seen so far. The kits
are around 350 - 400 or so, but don't require electronics expertise to get
started. Making one walk around a room is relatively easy with a little
practice.
Stefik
On Thu, Apr 14, 2016 at 12:32 AM, Sean Murphy <mhysnm1964@xxxxxxxxx
<mailto:mhysnm1964@xxxxxxxxx> > wrote:
I wasn’t aware of so many people doing robotics. So where do you start if you
are completely new and don’t have a degree in electronics or programming, and
are just interested in learning for a hobby. How much are basic robotic kits? I
don’t have anyone who knows electronics, so I am really seeking for something
that is simple to build and program. My idea is to build a robot just to walk
around a room. I don’t know how difficult this would be or not.
Any resources or tips would be great. So I can start. I will be looking for a
robotic club in Sydney Australia to see if they can help.
Sea
eltronics
On 12 Apr 2016, at 6:41 am, rjaquiss <rjaquiss@xxxxxxxxxxxxx
<mailto:rjaquiss@xxxxxxxxxxxxx> > wrote:
Hello:
The Vex platform has pieces that bolt together. The robotc was fully
accessible. I used a command line to compile my programs. If I recall
correctly, I used a USB cable to transfer the code. This was in 2007.
Regards,
Robert
-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx <mailto:program-l-bounce@xxxxxxxxxxxxx>
[mailto:program-l-bounce@xxxxxxxxxxxxx ;
<mailto:program-l-bounce@xxxxxxxxxxxxx> ]
On Behalf Of Tiresias Engineer
Sent: Monday, April 11, 2016 1:01 PM
To: program-l@xxxxxxxxxxxxx <mailto:program-l@xxxxxxxxxxxxx>
Subject: [program-l] Re: Robotics for the blind
Hello
and how accessible was the Vex platform? regarding both, software and
hardware?
On 4/11/2016 5:46 PM, rjaquiss wrote:
Hello:
Some years ago (2009), I used NXC (Not Exactly c) to program a
Lego Mindstorm. I also had a Vex robot and used Robotc in 2007. As for
the Lego, I was able to operate the control panel to run the program I
compiled. The Lego unit has other functions which are not accessible.
Hope this helps.
Regards,
Robert
-----Original Message-----
From: program-l-bounce@xxxxxxxxxxxxx <mailto:program-l-bounce@xxxxxxxxxxxxx>
[mailto:program-l-bounce@xxxxxxxxxxxxx ;
<mailto:program-l-bounce@xxxxxxxxxxxxx> ]
On Behalf Of Sean Murphy
Sent: Monday, April 11, 2016 2:31 AM
To: program-l@xxxxxxxxxxxxx <mailto:program-l@xxxxxxxxxxxxx>
Subject: [program-l] Robotics for the blind
Hi
What is peoples experance with robotic programming?
Sean
My experience is the part
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=unsubscribe]
** If this link doesn't work then send a message to:
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:program-l-request@xxxxxxxxxxxxx ;
<mailto:program-l-request@xxxxxxxxxxxxx> ?subject=faq]
** or send a message, to
** program-l-request@xxxxxxxxxxxxx <mailto:program-l-request@xxxxxxxxxxxxx>
with the Subject:- faq
