I typed it wrong. What I put in the run box was this: format a: /v:Test /q /f:1.44 /c So I re-typed it without the space between the : and the /v and still nothing. Pc ----- Original Message ----- From: Cy Halbach To: pchelpers@xxxxxxxxxxxxx Sent: Tuesday, July 15, 2003 12:33 PM Subject: [pchelpers] Re: no format OK I tried that too but I got an error message: C:\>FORMAT a:Test /Q /F:1.44 /C Parameter format not correct - a:Test However using the right syntax it worked fine as follows: Tue 07-15-2003 13:28:15.47 C:\>Format a: /V:Test /Q /F:1.44 /c Insert new diskette for drive A: and press ENTER when ready... Checking existing disk format. QuickFormatting 1.44M Format complete. 1,457,664 bytes total disk space 1,457,664 bytes available on disk 512 bytes in each allocation unit. 2,847 allocation units available on disk. Volume Serial Number is 2734-14F0 Checking the Label: A-OK C:\>label a: Volume in drive A is TEST Volume Serial Number is 2734-14F0 Cy ----- Original Message ----- From: "PcCowboy" <saddle@xxxxxxxxxxxxxxxxxxx> To: <pchelpers@xxxxxxxxxxxxx> Sent: Tuesday, July 15, 2003 10:16 AM Subject: [pchelpers] Re: no format > Just tried FORMAT a:Test /Q /F:1.44 /C > in the run command. > A dos box popped up asking me to insert a > disk in drive a: > After hitting enter nothing happened and the > box disappeared. > Pc Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig> Freelists login at //www.freelists.org/cgi-bin/lsg2.cgi List archives at //www.freelists.org/archives/pchelpers PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig Good advice is like good paint- it only works if applied. Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig> Freelists login at //www.freelists.org/cgi-bin/lsg2.cgi List archives at //www.freelists.org/archives/pchelpers PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig Good advice is like good paint- it only works if applied.