[pchelpers] Re: no format
- From: "Cy Halbach" <kr3y@xxxxxxxx>
- To: <pchelpers@xxxxxxxxxxxxx>
- Date: Tue, 15 Jul 2003 13:33:32 -0400
OK I tried that too but I got an error message:
C:\>FORMAT a:Test /Q /F:1.44 /C
Parameter format not correct - a:Test
However using the right syntax it worked fine as follows:
Tue 07-15-2003 13:28:15.47
C:\>Format a: /V:Test /Q /F:1.44 /c
Insert new diskette for drive A:
and press ENTER when ready...
Checking existing disk format.
QuickFormatting 1.44M
Format complete.
1,457,664 bytes total disk space
1,457,664 bytes available on disk
512 bytes in each allocation unit.
2,847 allocation units available on disk.
Volume Serial Number is 2734-14F0
Checking the Label: A-OK
C:\>label a:
Volume in drive A is TEST
Volume Serial Number is 2734-14F0
Cy
----- Original Message -----
From: "PcCowboy" <saddle@xxxxxxxxxxxxxxxxxxx>
To: <pchelpers@xxxxxxxxxxxxx>
Sent: Tuesday, July 15, 2003 10:16 AM
Subject: [pchelpers] Re: no format
> Just tried FORMAT a:Test /Q /F:1.44 /C
> in the run command.
> A dos box popped up asking me to insert a
> disk in drive a:
> After hitting enter nothing happened and the
> box disappeared.
> Pc
Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig>
Freelists login at //www.freelists.org/cgi-bin/lsg2.cgi
List archives at //www.freelists.org/archives/pchelpers
PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig
Good advice is like good paint- it only works if applied.
Other related posts:
