[opendtv] Re: 70th Anniversary Blu-ray and standard DVDs of the Wizard of Oz

  • From: "John Shutt" <shuttj@xxxxxxxxx>
  • To: <opendtv@xxxxxxxxxxxxx>
  • Date: Wed, 30 Sep 2009 17:09:51 -0400

Cliff,
If you are truly watching a Blu-Ray disk of Wizard of Oz, it is indeed a 16:9 image, as your first screen captures showed. The video is simply pillarboxed. There is no such thing as a 4:3 HD Blu-Ray.
If your output is set to 4:3 Pan & Scan, it should fill the 4:3 monitor with the center portion of the video, effectively throwing away the pillar boxing of the Blu-Ray version of The Wiz.
If both of your Blu-Ray players are not doing this, that's another matter. Do you happen to have both an HDMI cable and an NTSC cable connected to your Blu-Ray player simultaneously? If so, then the HDMI may be overriding the 4:3 Pan & Scan setting with an implied 16:9 setting. 

John
----- Original Message ----- From: "Cliff Benham" <flyback1@xxxxxxxxxxx> 
To: <opendtv@xxxxxxxxxxxxx>
Sent: Wednesday, September 30, 2009 3:25 PM
Subject: [opendtv] Re: 70th Anniversary Blu-ray and standard DVDs of the Wizard of Oz 



John Shutt wrote:

Cliff,

What specific make and model Blu-Ray are you using?  The instructions for
the Philips BDP-7200 Blu-Ray player specifically shows a "4:3 pan and scan" NTSC mode, which is what I always set on my DVD players when connected to a 
4:3 television.
Manual: http://www.p4c.philips.com/files/b/bdp7200_f7/bdp7200_f7_dfu_aen.pdf 

Read Page 35.

John
None of the examples on page 35 shows a 1.33:1 4:3 film being played, only 16:9. 
This is the problem I think. 1.33:1 4:3 is being ignored by Blu-ray.

Cliff


----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:
- Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. 







----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:
- Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org 
- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word 
unsubscribe in the subject line.

Other related posts:

  1. Home
  2. opendtv
  3. Archive
  4. 09-2009