Jesse, http://steeeeem.mysite.freeserve.com or Google then steeeeem & it will come up. E.W. ----- Original Message ----- From: "Jesse Livingston" <fernj1@xxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Thursday, January 05, 2006 1:37 AM Subject: [modeleng] Re: ReWebsite > Eric, > > Congratulations on your long and successful marriage. You got off cheaper > than I did! What is the addy of your website? > > Jesse in Tennessee > > >> Jesse my wife to was a bargain, I wed her in 56 & I didn't even buy her a >> diamond ring. If you look on my website you will see her making concrete >> sleepers. >> Regarding bandsaws I bought a second hand Taiwanese wood working model & >> slowed it down with 18" & 10"pulleys, I have used it continuously for 8 >> years & cut all the point blades on it & they are 30mm thick I am still >> using the same blade. There are photos of this machine on the other site. >> I >> forgot to mention the pulleys are made of hardboard. >> >> E.W. >> >> >> >> ----- ----- >> >> >> >> >> >> >>> >>> MODEL ENGINEERING DISCUSSION LIST. >>> >>> To UNSUBSCRIBE from this list, send a blank email to, >>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the >>> subject >>> line. >>> >> >> >> >> MODEL ENGINEERING DISCUSSION LIST. >> >> To UNSUBSCRIBE from this list, send a blank email to, >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject >> line. > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.