[korgypark] Re: Midi channels
- From: "cdmando" <cdmando@xxxxxxxxxx>
- To: <korgypark@xxxxxxxxxxxxx>
- Date: Tue, 8 Jan 2002 09:29:05 -0500
But wouldnt that also prevent the drum machine from getting the information
as well? Or will everything on channel 10 still be passed thru to the drum
machine?
Thanks!!
Jim
----- Original Message -----
From: Thomas Anderssen <thomas.anderssen@xxxxxxxxxxxx>
To: <korgypark@xxxxxxxxxxxxx>
Sent: Tuesday, January 08, 2002 12:53 AM
Subject: [korgypark] Re: Midi channels
>
> Hello.
>
> It is quite easy.
> Select Timbre Off on channel 10 in your sequencing program. This can
> be done by selecting bank 7425 (decimal) or sending the following
> controllers: 00 58 00 00 xx (xx = any value). Make sure that you use
> it for the Korg only, i.e. that you have selected the check box
> "Independent Synth/MIDI Out" in the Serial driver seutp window (if
> you use the serial interface).
>
> cheers, Thomas
>
>
>
> On 7 Jan 2002 at 13:12, cdmando wrote:
>
> > Please forgive me on this one but my manual is packed away somewhere
> > after a recent move. Is there a way to have the Korg X5 ignore any
> > one midi channel? What I want to do is come out of my PC to the
> > Korg then "thru" to my drum machine. Of course I do not want the
> > Korg playing the drum notes too so I thought If I could "mute"
> > channel 10 from the Korg and send it thru to the drum machine that
> > would be great. Any way to do this??
> Thomas Anderssen
> Jakobstad Energy Utility (www.jpenergy.net)
> Victor Schaumansesplanaden 1
> FIN-68600 JAKOBSTAD
> Finland
>
> ----------------------------------------------------------------
> This message was sent through the Korgy Park mailing list.
> Mailing list info page: //www.freelists.org/list/korgypark.
>
>
----------------------------------------------------------------
This message was sent through the Korgy Park mailing list.
Mailing list info page: //www.freelists.org/list/korgypark.
Other related posts:
