[jhb] Re: Help with IvAp v2
- From: Mike Lucas <mhlucas@xxxxxxxxxxxx>
- To: jhb@xxxxxxxxxxxxx
- Date: Sun, 09 Sep 2007 17:54:01 +0100
Denis
Bear in mind that my reply refers to my FS9 installation. There may be
some differences with FSX.
When you installed and set up IvAp to two PCs, you should have been
asked to identify which PC would be running -
- the FS interface
- the User Interface
- the Network Interface
The FS interface has to be on the FS PC. I also run the Network
Interface on the FS PC - I initially tried to run it on the non-FS PC
but IvAp would not run. I run the User Interface on the non-FS PC.
Check your configuration on both PCs via Start >> Programs >> IVAO >>
IvAp configuration (see Manual Ch 17, p72, and Ch 20, pp 79-80).
Once this is set up, the first bit of software to launch is the Network
Interface - should be in your Start >> Programs >> IVAO folder. Next
you launch the UI - in my case, on the other PC. Once these two are
running, your FS PC should show 3 reds and 1 green in the system tray.
Now you start FS, and go to the new IVAO menu item >> Start IvAp. If
everything is OK, this should fire up after a couple of seconds (you'll
get a ribbon at the top of the screen confirming this), and your 3
reds/1 green should become 1 red/3 greens. You're in business!!
Now you go to the UI and click on connect - you will be prompted for
your personal data: userID, password, etc - and when you OK this you are
finally connected to the IvAp server and you should have 4 greens.
Come back once you've digested this!
Mike L
Denis Ripley wrote:
Mike,
Sorry about the reply just sent. Finger trouble. My answer about the
Network Interface still stands. To reply to your other questions, I
don't show the 4 red/green lights anywhere. As to which PC am I running
the NI, I don't believe I am running it at all and that may be the
source of my problem. Please explain in more detail about the NI.
Denis
Other related posts:
