Dennis, You say you have prot-forwarded, to which machine? Try forwarding to the other see if that resolves the issue. I don't run over the LAN but I would suggest the port forward needs to point to the machine running the Network Interface. Paul PS 42-17, it could have been worse... <g> -----Original Message----- From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Lucas Sent: 08 September 2007 23:17 To: jhb@xxxxxxxxxxxxx Subject: [jhb] Re: Help with IvAp v2 Denis What do the four system tray status lights show - red or green? Are you remembering to start the network interface before the UI? As a matter of interest, on which of your two PCs are you running the network interface? - I couldn't get my (FS9) setup to run with the network interface on the non-FS PC; I had to reconfigure it to run on the FS PC, although the UI is running on the non-FS PC. Mike L Denis Ripley wrote: > Hi Guts, > > I have reached the hair pulling stage whilst trying to run IvAp > v2(FSX) > on a second computer. > > Let me layout where I have got to at the moment. I have IvAp v2 > installed on both computers. I have run ivap_config.exe on both > computers, indicating via the radio buttons which computer is the FSX > one and which is not. The FSX computers IP has been entered in the > appropriate place, after using 'cmd/ipconfig' to make sure I had the > correct number. I can display the user interface on the second machine. > When I press the connect button after filling-in my user id, password, > ident etc, etc, the UI just sits there and stares back at me, twitching > every now and then. Lights on the front of the UI show 'fp' in red and > 'net' in green. The port number that IvAp v2 is using is 6811. I have > specified this number in both computers Firewalls(XP SP2) both in TCP > and UDP. I have port forwarded it also in my router(not sure if all > these were necessary but I included them on the off chance). I have > tried to connect with both Firewalls off but still no joy. I have > Teamspeak automatically loading when I start the UI and it connects when > asked to do so(this all on the second computer). I can key Teamspeak > remotely from my joystick as per Peter Dowson/Paul's instructions. > > I think that covers everything that I have tried and thereby my call > for > help. The solution is probably something that I have forgotten to do but > for the life of me I can't think what it could be. Anyone with any ideas > is encouraged to reply. > > Denis > >