Re: switching to ILM from Quella
- From: Karl Smith <karl@xxxxxxxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Tue, 28 Dec 2004 09:58:01 -0700
Hello,
A couple of things about ILM. First of all, if you authorize a computer
with it and then have to reformat the disk drive, reinstall windows or
whatever you can reauthorize the same computer without loosing a key. The
only way you will loose a key on the same machine is if you make some
hardware changes which changes the locking code of the machine. This is
much the same as what happens with Windows XP.
If you have two computers, desktop and laptop, you can authorize both using
one key for each. If you get a new computer or do something to change the
locking code on either you can use up your last key to re-authorize it.
If you use up all your keys you can contact Freedom Scientific to have them
reset without charge. To my knowledge there are no plans to charge for
this. The only reason FS is limiting your number of keys is to keep track
of how many times your key is used. If you are the actual end user and
have a legitimate reason for increasing your key count they will do it. HTH.
Karl
At 08:11 AM 12/28/2004, you wrote:
>What do you mean from PC to PC, you can't do that, if you get a new PC, you
>lose another authorization with the new system. If you, like me have a
>desktop PC and a laptop PC, you start out with 3, you authorize those 2
>computers, now I have 1 left, if I now have a problem with this computer or
>decide to put the new ILM authorization on my ham radio desk computer, I'm
>out of luck should I buy a new PC unless I have the count reset and I think
>they'll only do it once free or something from what I was told so basically,
>my ham radio desk computer is staying at 5.1 for good with the quella
>authorization so I keep 1 extra key and my old way of a new computer every
>couple years is going to have to stop here I guess.
>----- Original Message -----
>From: "Rick Watson" <rick@xxxxxxxxxxx>
>To: <jfw@xxxxxxxxxxxxx>
>Sent: Tuesday, December 28, 2004 9:54 AM
>Subject: RE: switching to ILM from Quella
>
>
> > Good morning everyone,
> >
> > I wonder how difficult it will be to move authorizations from pc to pc
> > under the internet auth method?
> >
> > Rick
> >
> >
> > -----Original Message-----
> > From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On
> > Behalf Of Bruce Toews
> > Sent: Monday, December 27, 2004 3:04 PM
> > To: jfw@xxxxxxxxxxxxx
> > Subject: RE: switching to ILM from Quella
> >
> >
> > The Quella version of JFW currently available expires in March. You will
> >
> > need to move to the ILM version, but from my understanding, FS will=20
> > provide a seamless way to do this when your new ILM disk arrives. Quella
> >
> > will be no more after March of 2005.
> >
> > Bruce
> >
> > --=20
> > Bruce Toews
> > E-mail and MSN/Windows Messenger: water_drinker@xxxxxxxx
> > Web Site (including info on my weekly commentaries): http://www.ogts.net
> > For the best oldies anywhere visit http://www.treasureislandoldies.com
> >
> > On Mon, 27 Dec 2004, Chip Orange wrote:
> >
> >> If you are on the pre-authorized serial number list for 6.0, will you=20
> >> still need some separate ILM authorizations? I have to admit to being
> >
> >> pretty confused about this whole program.
> >>
> >> Thanks.
> >>
> >> Chip
> >> =3D20
> >>
> >>> -----Original Message-----
> >>> From: jfw-bounce@xxxxxxxxxxxxx=3D20 [mailto:jfw-bounce@xxxxxxxxxxxxx] =
> >
> >>> On Behalf Of david poehlman
> >>> Sent: Thursday, December 23, 2004 3:54 AM
> >>> To: jfw@xxxxxxxxxxxxx
> >>> Subject: Re: switching to ILM from Quella
> >>> =3D20
> >>> Have you checked the data base to see if you have any ilm=3D20=20
> >>> authorizations for 6.0? If so, You may need fs to help you with=20
> >>> this. =3D20 Johnnie Apple Seed
> >>> =3D20
> >>> ----- Original Message -----
> >>> From: "John Miller" <n1umj@xxxxxxxxxxx>
> >>> To: <jfw@xxxxxxxxxxxxx>
> >>> Sent: Wednesday, December 22, 2004 9:51 PM
> >>> Subject: Re: switching to ILM from Quella
> >>> =3D20
> >>> =3D20
> >>> yes I do
> >>> ----- Original Message -----=3D20
> >>> From: "david poehlman" <david.poehlman@xxxxxxxxxxxxxxxxxxxxxxxx>
> >>> To: <jfw@xxxxxxxxxxxxx>
> >>> Sent: Wednesday, December 22, 2004 8:33 PM
> >>> Subject: Re: switching to ILM from Quella
> >>> =3D20
> >>> =3D20
> >>>> do you have your 20 digit auth code?
> >>>>
> >>>> Johnnie Apple Seed
> >>>>
> >>>> ----- Original Message -----=3D20
> >>>> From: "John Miller" <n1umj@xxxxxxxxxxx>
> >>>> To: "JFW list" <jfw@xxxxxxxxxxxxx>
> >>>> Sent: Wednesday, December 22, 2004 7:39 PM
> >>>> Subject: switching to ILM from Quella
> >>>>
> >>>>
> >>>> Hi all, I decided to switch to ILM today form the quella=3D20
> >>> authorization,
> >>>> has
> >>>> anyone else done this? I can not get it to work at all, the=3D20
> >>> ILM version of
> >>>> jaws will not run on my computer, the quella version of=3D20
> >>> version 6 will,
> >>>> but
> >>>> not the ILM, is there something I need to know before=3D20
> >>> switching? anyone
> >>>> have
> >>>> any ideas? has anyone done this yet?
> >>>>
> >>>>
> >>>> --
> >>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx To=20
> >>>> unsubscribe from this mailing list, send a message to=20
> >>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the=3D20
> >>> subject line.
> >>>> Archives located at: //www.freelists.org/archives/jfw
> >>>>
> >>>> If you have any concerns about the list, post received from=3D20
> >>> the list, or
> >>>> the
> >>>> way the list is being run, do not post them to the list.=3D20
> >>> Rather contact
> >>>> the
> >>>> list owner at jfw-admins@xxxxxxxxxxxxxx
> >>>>
> >>>> --
> >>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx To=20
> >>>> unsubscribe from this mailing list, send a message to=20
> >>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the=3D20
> >>> subject line.
> >>>> Archives located at: //www.freelists.org/archives/jfw
> >>>>
> >>>> If you have any concerns about the list, post received from=3D20
> >>> the list, or
> >>>> the way the list is being run, do not post them to the list. Rather=20
> >>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>>>
> >>> =3D20
> >>> =3D20
> >>> --
> >>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx To=20
> >>> unsubscribe from this mailing list, send a message to=3D20=20
> >>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the=3D20 =
> > subject
> >
> >>> line. Archives located at: //www.freelists.org/archives/jfw
> >>> =3D20
> >>> If you have any concerns about the list, post received from=3D20
> >>> the list, or the=3D20
> >>> way the list is being run, do not post them to the list.=3D20
> >>> Rather contact the=3D20
> >>> list owner at jfw-admins@xxxxxxxxxxxxxx
> >>> =3D20
> >>> --
> >>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> >>> To unsubscribe from this mailing list, send a message to=3D20
> >>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the=3D20
> >>> subject line.
> >>> Archives located at: //www.freelists.org/archives/jfw
> >>> =3D20
> >>> If you have any concerns about the list, post received from=3D20
> >>> the list, or the way the list is being run, do not post them=3D20
> >>> to the list. Rather contact the list owner at=3D20
> >>> jfw-admins@xxxxxxxxxxxxxx
> >>> =3D20
> >> --
> >> To post a message to the list, send it to jfw@xxxxxxxxxxxxx To=20
> >> unsubscribe from this mailing list, send a message to=20
> >> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject=20
> >> line. Archives located at: //www.freelists.org/archives/jfw
> >>
> >> If you have any concerns about the list, post received from the list,=20
> >> or the way the list is being run, do not post them to the list. Rather
> >
> >> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> >>
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> > the way the list is being run, do not post them to the list. Rather
> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
> > --
> > To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> > To unsubscribe from this mailing list, send a message to
> > jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> > Archives located at: //www.freelists.org/archives/jfw
> >
> > If you have any concerns about the list, post received from the list, or
> > the way the list is being run, do not post them to the list. Rather
> > contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
>
>--
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>Archives located at: //www.freelists.org/archives/jfw
>
>If you have any concerns about the list, post received from the list, or
>the way the list is being run, do not post them to the list. Rather
>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
___________________________________________
Axis
Karl Smith, Assistive Technology Consultant
4304 South El Camino St.
Taylorsville, Utah 84119
Phone: 801-967-5655
Toll Free: 866-824-7885
Fax: 866-824-7885
E-mail karl@xxxxxxxxxxxx
Web Site: http://www.axistech.net
- Never confuse an open mind with an empty head.
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
