[jaws-uk] Re: Jaws not speaking at start up
- From: "Amro Bilal" <amro_bilal@xxxxxxx>
- To: <jaws-uk@xxxxxxxxxxxxx>
- Date: Wed, 6 Aug 2008 11:11:44 +0100
Hi Graham,
Thanks for that but I only have one audio device on this machine which's my
motherboard's soundcard. I've just updated my audio drivers as well but that
didn't make any different. Thanks for the suggestion though.
Cheers,
Amro
----- Original Message -----
From: Graham Page
To: jaws-uk@xxxxxxxxxxxxx
Sent: Tuesday, August 05, 2008 8:27 PM
Subject: [jaws-uk] Re: Jaws not speaking at start up
Amro do you have more than one sound device? Maybe you have 2 sound cards, a
sound card and a skype phone or something like this. JAWS can be a bit odd
sometimes about which device it actually defaults to using and there is an FAQ
with the solution to this which I will add below as finding the thing on the
website can be a bit of a pain. If this is not the problem then of course
ignore what is below.
In the original faq it talks about installing an updated version of
e'loquence. This is not required for most users now so I have got rid of
reference to it in the information below.
Regards
Graham
Bulletin Type: FAQ
Date Posted: 04/04/2003
Product Name: JAWS
Version: 4.51
Category: Synthesizer
Question:
I have two sound cards on my computer. How do I make sure JAWS uses the one I
want?
Answer:
Many JAWS users who also use music or audio production software want JAWS and
Eloquence to speak through one sound card, while using the other for their
production work. To do this, you need to edit a file called JFW.ini.
Editing the jfw.ini file:
1. Using My Computer or Windows Explorer, browse your hard drive to the
currently running version of JAWS and find the jfw.ini file in that folder.
2. Press ENTER to open.
3. You should find some lines that read:
Synth1Name=eloq
Synth1LongName=Eloquence for JAWS
Synth1Driver=eloq
The number doesn't matter, it may be 1, 2, or 3, but it must be the same for
all entries for Eloquence.
4. Add the following line after the driver line: Synth1Port=SB Live! Wave
Device Of course, you need to make sure that the synth number matches the other
lines, so that if the Driver line read:
Sytn3Driver=eloq
Then the port line would read:
Synth3Port=SB Live! Wave Device
The text after the = sign in the Port line comes from Control Panel/Sound &
Multimedia/Audio tab It must be one of the entries that can be chosen for
Preferred Playback device.
5. Save your changes and exit Notepad.
----- Original Message -----
From: Amro Bilal
To: Jaws Emailing List
Sent: Tuesday, August 05, 2008 6:45 PM
Subject: [jaws-uk] Jaws not speaking at start up
Hi all,
Since I reinstalled XP Professional last week on my computer I'm having the
following problem.
I have Jaws configured to start automatically when the computer starts.
Jaws starts ok, but, with no speech. I have to unload Jaws and reload it for
Jaws to talk. I tried this with Jaws 9 and older versions but the results are
the same.
Would anyone have an idea what might be bothering Jaws?
Cheers,
Amro
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.5.12/1592 - Release Date: 05/08/2008
06:03
Graham Page
Home Phone: 0207 265 9493
Mobile: 07753 607980
Fax: 0870 706 2773
Email: gpage@xxxxxxxxxxxxxx
MSN: gabriel_mcbird@xxxxxxxxxxx
Skype: gabriel_mcbird
Other related posts:
