[PCB_FORUM] Re: Routing in Ver 15.1
- From: "Tony Stanislao" <stanislao_t@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 28 Jun 2004 13:21:07 -0400
I added "set acon_oldcmd = TRUE" to my local env and it now routes the
way it did in Ver 14.
Thanks for everyone's help on my problem.
Tony Stanislao, Senior PCB Design Engineer
Pannaway Technologies | v: 603.766.5129| e: stanislao_t@xxxxxxxxxxxx
=========================================
-----Original Message-----
From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx]
Sent: Thursday, June 24, 2004 4:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Routing in Ver 15.1
Tony, I believe if you download the latest updates It may fix your
problem.>
> From: "Gary MacIndoe" <gary.macindoe@xxxxxxx>
> Date: 2004/06/24 Thu PM 03:41:06 EDT
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Routing in Ver 15.1
>
> Tony,
>
> This was driving me crazy also, and my support guy managed to get it
fixed.
> But... he's not here now (on a one month vacation!), and I can't
remember
> what he did to fix it. I can't find a setting in User Preferences,
and I
> don't see anything in either "env" file (my local or the global).
It's
> possible that it was fixed by a patch from Cadence. I am running
"15.1
> (3/23/2004) s016 (v15-1-31S) i86". If you are paying for maintenance,
check
> with Cadence.
>
> Good luck,
>
> Gary E. MacIndoe
> PCB Design Engineer
> Advanced Micro Devices, Inc.
> Longmont, Colorado
>
>
> -----Original Message-----
> From: Tony Stanislao [mailto:stanislao_t@xxxxxxxxxxxx]
> Sent: Thursday, June 24, 2004 11:34 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Routing in Ver 15.1
>
>
> Hey Guys,
>
>
>
> Me and another designer here at work just switched over to Ver 15.1
about
> 2 months ago. We both really like the new features but notice that the
> routing is kind of narley. It does not have that smooth easy routing
feel
> that was in V14. Has anyone else experienced this? Is there a switch
to set
> to get it to route like V14? I can't route as fast. The routing
doesn't seem
> to go where I want it to go. I find myself routing and then fixing it.
Any
> suggestions would be greatly appreciated.
>
>
>
>
>
> Tony Stanislao, Senior PCB Design Engineer
> Pannaway Technologies | v: 603.766.5129| e: stanislao_t@xxxxxxxxxxxx
>
> =========================================
>
>
>
>
BEGIN:VCARD
VERSION:2.1
N:Stanislao;Tony
FN:Tony Stanislao
ORG:Pannaway Technologies
TITLE:Senior PCB Design Engineer
NOTE;ENCODING=QUOTED-PRINTABLE:Pannaway Technologies designs and develops
converged broadband voice, video =
and data platforms. Its solutions enable telecommunications providers world=
wide to offer unified services to homes and businesses with an unbeatable va=
lue proposition-opening new markets and creating new revenue streams.=0D=0A=
=0D=0APannaway's pioneering Service Convergence Network (SCN=99) architectur=
e offers telecommunications service providers the first carrier-class, end-t=
o-end IP converged solution available anywhere, in turn allowing them to del=
iver a secure combination of guaranteed billable services over a single conn=
ection.=0D=0A=0D=0ARigorously architected and thoroughly tested by Pannaway'=
s Ethernet IP and voice experts, the Service Convergence Network is the #1 s=
ingle-vendor solution for secure, converged broadband transport services.=
=0D=0A
TEL;WORK;VOICE:603-766-5129
TEL;WORK;FAX:603-766-5150
ADR;WORK;ENCODING=QUOTED-PRINTABLE:;;215 Commerce Way =0D=0ASuite
3;Portsmouth;NH;03801;United States
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:215 Commerce Way =0D=0ASuite
3=0D=0APortsmouth, NH 03801=0D=0AUnited States
URL;WORK:http://www.pannaway.com
EMAIL;PREF;INTERNET:stanislao_t@xxxxxxxxxxxx
REV:20031211T230145Z
END:VCARD
Other related posts:
