Jim, Might this work? : - Print PDF to HPGL - Import HPGL into a CAM tool, and export Gerber You'd need to ensure you set the HPGL "pen widths" to correct sizes in the CAM tool when you import the HPGL, and ensure you had these values echoed in an aperture file within the CAM design. Dave Schaefer <mailto:dave.schaefer@xxxxxxxxxxxx> dave.schaefer@xxxxxxxxxxxx -----Original Message----- From: J Wages [mailto:jwages@xxxxxxxxx] Sent: Monday, June 28, 2004 12:53 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Need fabrication and assy data from pdf files I began a thread last week discussing reverse engineering designs from various legacy part numbers. After working with the sample designs I received from the customer, I was able to read all but one into Allegro by using the PADS interface, or manually creating aperture lists and importing the various gerber file types. I do, however, have one design that only has an Adobe PDF drawing file of the etch, components, and pins. It does not include drill sizes or exact locations. I will be requesting this information from the customer today. Does anyone have any contact information for someone that can create fabrication and assembly files (gerber and N.C.) from a pdf file? I assume they would have to scan in the drawing or extract from some kind of PDF editing tool. Thanx Jim S. Wages Independent Cadence PC Board Layout Designer