Folks,[ Joseph M. Riccardi ] I did not see my copy back so I am
guessing I hit the file size limit. Trying again...
I appreciate all of the help with this misadventure but it is time for me to
back out of it. At Russ' suggestion, last night I ran ds_stasict on all CPs
and those files contain data although I am not sure if they are correct,
sort of cryptic data. It seems to me that all of the required files are
good but the system lacks communications from the AW70 to the CPs. Since I
just recently replaced a NIC on another AW70, I am starting to suspect a
hardware problem. Before I disassemble this mess, is there any sort of
ping-type command that would check the hardware communications from the AW70
to the CPs?
Thanks again for all of the help...
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave