That was quite the load of changes. So was old CP host checkpoint files
removed, rm_station run to remove former sict table entries. Is CSA truly only
running in one place now. There is a whole list of checks.
Sent from my iPhone
On Sep 21, 2016, at 2:48 PM, Joseph M. Riccardi <Joe@xxxxxxxxxxxxx> wrote:
Russ, et al
Thanks for the lead on the cdrom setup... As part of the SysDef changes, I
also wanted to move a System Monitor, the CSA, the ICC, and the CP Hosting
to a different AW70. I think the SysDef changes were easy enough and the
"5.2.1 Procedure to Move CSA between 70 Series Stations" per V6.1 Windows NT
Upgrade Considerations Manual B0193XL also seemed to go smoothly with no
errors.
However, when I open the CIO_Config it appears that all of the Compounds are
listed but when I pick one I get "CSA Error - CSgetcmpd Failed". And if I
instead select a Station there are no CPs listed. Before starting I ran
/opt/fox/ciocfg/api/save_all for all CPs on the original AW70, copied them
all to the new AW70, but when I run /opt/fox/ciocfg/api/load_all for each CP
the script just hangs forever.
Where did I go wrong; what did I miss?
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Tuesday, September 20, 2016 7:17 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Windows NT AW70 V6.4 SysDef changes and commit
Disable I/A boot from red fox in control panel Reboot PC Install appropriate
day0 cdrom for your version Run setup from cdrom From menu that's appears
select the commit option, or sub menu that gets you there Make sure you are
using a reconciled day 1 commit
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joseph M. Riccardi
Sent: Tuesday, September 20, 2016 6:40 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Windows NT AW70 V6.4 SysDef changes and commit
Windows NT AW70 folks,
I revised the SysDef files and created a commit diskette. There are a
number of manuals describing the SysDef process up to and including creating
the commit diskette but I cannot find anything on what to do with it next?
I have done plenty of UNIX boxes (Config/Install_AW) but never a WinNT box.
Anyone remember how to re-commit Windows NT AW70?
Thanks
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx <mailto:Joe@xxxxxxxxxxxxx>
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
