Duc,
Yes, and that is the only problem at this point. The CPs will not boot to
the new AW70 even though they are now clearly hosted by it. But they have
to be on line; no? Russ gave me some leads to look at Monday. Next week is
my last week on site for a while so if I cannot get this finished by the
30th, then I will have to take back what I told Scott earlier; "... there is
no emergency here". :-)
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Duc M Do
Sent: Saturday, September 24, 2016 12:49 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Windows NT AW70 V6.4 SysDef changes and commit
Strictly speaking, Russ is correct, of course. Booting is between the host
AW and the CP. The CP sends out boot requests and the AW responds, and the
CP will boot. That's it.
Now, to get the FBMs on-line and all that jazz afterward, yes, you'll need
the SysMon to do that.
Duc
On Sat, Sep 24, 2016 at 3:36 PM, Joseph M. Riccardi <Joe@xxxxxxxxxxxxx>
wrote:
Russ,
I forgot to ask... Regarding, "Plus you don't need system monitor
running to get a CP to boot." How? I need to put them on line 1st;
no? How else besides the System Management Display? The System
Monitor does not show up...
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A.
Adams