"Also field extension base plate field bus 1 to a set of 2F2 fiber modules to
two older 200 series base plates"
I strongly feel your problem is here.
If process allows you, remove all FBM200s, you;ll notice the PIOBUS errors
dissapear.
Start adding one by one, when the problem reappears replace that FBM with a
brand new one (Hopefully your spares manufacturing date is recent). Repeat.
Good Luck
--------------------------------------------
El sáb, 9/24/16, Brian Long <blong@xxxxxxx> escribió:
Asunto: Re: [foxboro] CP270 with FBM100's
A: foxboro@xxxxxxxxxxxxx
Fecha: sábado, 24 de septiembre de 2016, 03:25 am
Thanks, forgot about
this. These were installed with CP60's.
Brian
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of William C Ricker
Sent: Friday, September 23, 2016 10:19 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with
FBM100's
Any chance
these baseplates are among the rev that needed to be
replaced
for
270 series
service? The DIN IO system book shows which revs are
involved.
They are baseplates that date back
to CP60 installations
WCR
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Scott, Joe
Sent:
Friday, September 23, 2016 10:32 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with
FBM100's
CP field bus
ties to FBI 100 then to PIO. Also field extension base
plate
field bus 1 to a set of 2F2 fiber
modules to two older 200 series base
plates.
Then he'll cable to the last two base plates about 65
feet away.
Noise on bus A and B is causing
random system alarms?
Sent
from my iPhone
On Sep23, 2016, at 9:21 AM, Boulay, Russ
upgraded from a CP40B to FCP270 with 100 series.
So you
Then mention FEM100 .......so have youadded 200 Series FBM's to the
mix
Message-----
-----Original
From: foxboro-bounce@xxxxxxxxxxxxxOn Behalf Of Brian Long
[mailto:foxboro-bounce@xxxxxxxxxxxxx]
Sent: Thursday, September 22, 2016 9:39 PM
To: foxboro@xxxxxxxxxxxxxFBM100's
Subject: Re: [foxboro] CP270 with
use 4 position baseplate with fem100's as a standard
We
fieldbuschannel going to 2 position fbi100 baseplate
at 11:21 PM, Boulay, Russ
Sent from my iPhone
On Sep 22, 2016,
People commonly make mistake with fieldbus termination with
series. So on the FCP270 baseplate how are you100
from my iPhoneSent
William C Ricker
On Sep 22, 2016, at 9:06 PM,
wrote:<wcricker@xxxxxxxxxxxxxxx>
200 can be used to extend that
Forgot to include that FBI100 or
maximum
WCR
On Sep 23, 2016, at 12:03 AM, William C Ricker
Sent from my iPhone
to FCP270 is shorter than when
Fieldbus length when connected
toconnected
It had been 4000 I believe. Length OK?
PM, Brian Long <blong@xxxxxxx>
WCR
Sent from my iPhone
On Sep 22, 2016, at 10:59
CP270 connected to FBM100's. Have not
Just replaced a CP40B with
fieldbus issues prior to change. Now gettinghad any FBM or A/B
random FBM's. We've done this same CPintermittent A errors on
without issue. We've changed the FBIupgrade a number of times
A, re-terminated twinax cables, etc. Notmodules and nosecones on
words of wisdom?having much luck, any
__________________________________________________________________
Thanks,
Brian
is neither sponsored nor endorsed by_ ______ This mailing list
(formerly The Foxboro Company). Use the infoSchneider Electric
own risks. See the disclaimer atyou obtain here at your
www.thecassandraproject.org/disclaimer.html
//www.freelists.org/list/foxboro
foxboro mailing list:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
____________________________________________________________________
neither sponsored nor endorsed by_ ____ This mailing list is
Foxboro Company). Use the info youSchneider Electric (formerly The
See the disclaimer atobtain here at your own risks.
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
____________________________________________________________________
the Symantec Email Security.cloud_ _ This email has been scanned by
____________________________________________________________________service.
__
Confidentiality Notice: This e-mail, including any
***
_____________________________________________________________________
sponsored nor endorsed by_ ___ This mailing list is neither
Electric (formerly The Foxboro Company). Use the infoSchneider
risks. See the disclaimer atobtain here at your own
www.thecassandraproject.org/disclaimer.html
mailing list:
foxboro
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
______________________________________________________________________
___ This mailing list is neither sponsorednor endorsed by Schneider
Electric(formerly The Foxboro Company). Use the info
list:
foxboro mailing
to subscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by theSymantec Email Security.cloud
______________________________________________________________________
Notice: This e-mail, including any associated or
*** Confidentiality
______________________________________________________________________
___ This mailing list is neither sponsorednor endorsed by Schneider
Electric(formerly The Foxboro Company). Use the info you obtain
at your own risks. See thedisclaimer at
www.thecassandraproject.org/disclaimer.html
list:
foxboro mailing
to subscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave