Brian,
You should connect the FBI100 BP to the CP port not the FEM100 port(s)
Regards,
Scott
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of
Brian Long [blong@xxxxxxx]
Sent: Thursday, September 22, 2016 11:39 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
We use 4 position baseplate with fem100's as a standard but Use
fieldbus channel going to 2 position fbi100 baseplate for twinax
connection. This is about the 10th one we've done.
Sent from my iPhone
On Sep 22, 2016, at 11:21 PM, Boulay, Russ
<Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx> wrote:
People commonly make mistake with fieldbus termination with FCP270 to 100
series. So on the FCP270 baseplate how are you connected and terminated??
Sent from my iPhone
On Sep 22, 2016, at 9:06 PM, William C Ricker <wcricker@xxxxxxxxxxxxxxx>
wrote:
Forgot to include that FBI100 or 200 can be used to extend that maximum
length to 6000 ft.
WCR
Sent from my iPhone
On Sep 23, 2016, at 12:03 AM, William C Ricker <wcricker@xxxxxxxxxxxxxxx>
wrote:
Fieldbus length when connected to FCP270 is shorter than when connected to
CP40. Now it's 3200 ft.
It had been 4000 I believe. Length OK?
WCR
Sent from my iPhone
On Sep 22, 2016, at 10:59 PM, Brian Long <blong@xxxxxxx> wrote:
Just replaced a CP40B with CP270 connected to FBM100’s. Have not had any
FBM or A/B fieldbus issues prior to change. Now getting intermittent A
errors on random FBM’s. We’ve done this same CP upgrade a number of times
without issue. We’ve changed the FBI modules and nosecones on A,
re-terminated twinax cables, etc. Not having much luck, any words of
wisdom?
Thanks,
Brian
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave