Any chance these baseplates are among the rev that needed to be replaced for
270 series service? The DIN IO system book shows which revs are involved.
They are baseplates that date back to CP60 installations
WCR
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Scott, Joe
Sent: Friday, September 23, 2016 10:32 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
CP field bus ties to FBI 100 then to PIO. Also field extension base plate
field bus 1 to a set of 2F2 fiber modules to two older 200 series base
plates. Then he'll cable to the last two base plates about 65 feet away.
Noise on bus A and B is causing random system alarms?
Sent from my iPhone
On Sep 23, 2016, at 9:21 AM, Boulay, Russ<Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx> wrote:
that were not there on the CP40B?
So you upgraded from a CP40B to FCP270 with 100 series.
Then mention FEM100 .......so have you added 200 Series FBM's to the mix
On Behalf Of Brian Long
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
Sent: Thursday, September 22, 2016 9:39 PMchannel going to 2 position fbi100 baseplate for twinax connection. This is
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
We use 4 position baseplate with fem100's as a standard but Use fieldbus
<Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx> wrote:
Sent from my iPhone
On Sep 22, 2016, at 11:21 PM, Boulay, Russ
series. So on the FCP270 baseplate how are you connected and terminated??
People commonly make mistake with fieldbus termination with FCP270 to 100
wrote:Sent from my iPhone
On Sep 22, 2016, at 9:06 PM, William C Ricker <wcricker@xxxxxxxxxxxxxxx>
length to 6000 ft.
Forgot to include that FBI100 or 200 can be used to extend that maximum
<wcricker@xxxxxxxxxxxxxxx> wrote:
WCR
Sent from my iPhone
On Sep 23, 2016, at 12:03 AM, William C Ricker
to CP40. Now it's 3200 ft.
Fieldbus length when connected to FCP270 is shorter than when connected
//www.freelists.org/list/foxboroIt had been 4000 I believe. Length OK?
WCR
Sent from my iPhone
On Sep 22, 2016, at 10:59 PM, Brian Long <blong@xxxxxxx> wrote:
Just replaced a CP40B with CP270 connected to FBM100's. Have not
had any FBM or A/B fieldbus issues prior to change. Now getting
intermittent A errors on random FBM's. We've done this same CP
upgrade a number of times without issue. We've changed the FBI
modules and nosecones on A, re-terminated twinax cables, etc. Not
having much luck, any words of wisdom?
Thanks,
Brian
___________________________________________________________________
______ This mailing list is neither sponsored nor endorsed by
Schneider Electric (formerly The Foxboro Company). Use the info
you obtain here at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
//www.freelists.org/list/foxboro
_____________________________________________________________________
____ This mailing list is neither sponsored nor endorsed by Schneider
Electric (formerly The Foxboro Company). Use the info you obtain
here at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
attached files, is intended solely for the individual or entity to which it
_____________________________________________________________________
_ This email has been scanned by the Symantec Email Security.cloud
service.
_____________________________________________________________________
_
*** Confidentiality Notice: This e-mail, including any associated or
(formerly The Foxboro Company). Use the info you obtain here at your own
______________________________________________________________________
___ This mailing list is neither sponsored nor endorsed by Schneider
Electric (formerly The Foxboro Company). Use the info you obtain here
at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
attached files, is intended solely for the individual or entity to which it
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave