CP side is 2 slot baseplate, I/O side is 8 position baseplate.
No FDSI's
2f2's were just purchased
Have to get FBM info................
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Landry, Scott
Sent: Friday, September 23, 2016 9:49 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
Are FCM2F2s on remote side mount in 8-Pos BP or separate 2-Pos BP ?
Any FDSI modules in the 8h-8h-8v-8v setup ?
What are the FCM2F2 rev level ?
What is the manufacture date and type of each module (by Baseplate)
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Brian Long [blong@xxxxxxx]
Sent: Friday, September 23, 2016 9:40 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
2 horizontal (approx 7-10 years old) and 2 vertical (approx 2 years old).
Brian
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Boulay, Russ
Sent: Friday, September 23, 2016 9:35 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
What is vintage of 200 series baseplates....plus vertical or horizontal?
What is vintage of the 200 series fbm's themselves and what
vintage....(year)
__________________________________________________________________________
___________
Russ Boulay | Schneider Electric | Process Automation | United
States | Support Engineering Manager
Phone: +1 508 446 1769 | Mobile: +1 508 446 1769
Email: russ.boulay@xxxxxxxxxxxxxxxxxxxxxx | Site:
https://support.ips.invensys.com ;| Address: Fairfield, California
94534 United States
*** Please consider the environment before printing this e-mail
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Scott, Joe
Sent: Friday, September 23, 2016 7:32 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
CP field bus ties to FBI 100 then to PIO. Also field extension base plate
field bus 1 to a set of 2F2 fiber modules to two older 200 series base
plates. Then he'll cable to the last two base plates about 65 feet away.
Noise on bus A and B is causing random system alarms?
Sent from my iPhone
On Sep 23, 2016, at 9:21 AM, Boulay, Russ<Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx> wrote:
that were not there on the CP40B?
So you upgraded from a CP40B to FCP270 with 100 series.
Then mention FEM100 .......so have you added 200 Series FBM's to the
mix
fieldbus channel going to 2 position fbi100 baseplate for twinax
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Brian Long
Sent: Thursday, September 22, 2016 9:39 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] CP270 with FBM100's
We use 4 position baseplate with fem100's as a standard but Use
<Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx> wrote:
Sent from my iPhone
On Sep 22, 2016, at 11:21 PM, Boulay, Russ
100 series. So on the FCP270 baseplate how are you connected and
People commonly make mistake with fieldbus termination with FCP270 to
<wcricker@xxxxxxxxxxxxxxx> wrote:Sent from my iPhone
On Sep 22, 2016, at 9:06 PM, William C Ricker
maximum length to 6000 ft.
Forgot to include that FBI100 or 200 can be used to extend that
<wcricker@xxxxxxxxxxxxxxx> wrote:
WCR
Sent from my iPhone
On Sep 23, 2016, at 12:03 AM, William C Ricker
connected to CP40. Now it's 3200 ft.
Fieldbus length when connected to FCP270 is shorter than when
//www.freelists.org/list/foxboroIt had been 4000 I believe. Length OK?
WCR
Sent from my iPhone
On Sep 22, 2016, at 10:59 PM, Brian Long <blong@xxxxxxx> wrote:
Just replaced a CP40B with CP270 connected to FBM100's. Have not
had any FBM or A/B fieldbus issues prior to change. Now getting
intermittent A errors on random FBM's. We've done this same CP
upgrade a number of times without issue. We've changed the FBI
modules and nosecones on A, re-terminated twinax cables, etc. Not
having much luck, any words of wisdom?
Thanks,
Brian
__________________________________________________________________
_ ______ This mailing list is neither sponsored nor endorsed by
Schneider Electric (formerly The Foxboro Company). Use the info
you obtain here at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
//www.freelists.org/list/foxboro
____________________________________________________________________
_ ____ This mailing list is neither sponsored nor endorsed by
Schneider Electric (formerly The Foxboro Company). Use the info you
obtain here at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
attached files, is intended solely for the individual or entity to which
____________________________________________________________________
_ _ This email has been scanned by the Symantec Email Security.cloud
service.
____________________________________________________________________
_
_
*** Confidentiality Notice: This e-mail, including any associated or
//www.freelists.org/list/foxboro
_____________________________________________________________________
_ ___ This mailing list is neither sponsored nor endorsed by
Schneider Electric (formerly The Foxboro Company). Use the info you
obtain here at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=jointo subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leaveto unsubscribe:
//www.freelists.org/list/foxboro
______________________________________________________________________
___ This mailing list is neither sponsored nor endorsed by Schneider
Electric (formerly The Foxboro Company). Use the info you obtain here
at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
to subscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
service.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
______________________________________________________________________attached files, is intended solely for the individual or entity to which
*** Confidentiality Notice: This e-mail, including any associated or
//www.freelists.org/list/foxboro
______________________________________________________________________
___ This mailing list is neither sponsored nor endorsed by Schneider
Electric (formerly The Foxboro Company). Use the info you obtain here
at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
to subscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave