Re: [foxboro] IP Communications node-mesh-node

  • From: "Goldie, Shaun S" <Shaun.Goldie@xxxxxxxxxxxxxxxxxx>
  • To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
  • Date: Fri, 9 Oct 2009 10:38:16 +1300

Russ
The merge defaulted to NSAP 101 and we changed it to 002
The IP addresses were then picked from the sysdef puldowns
All the ip addresses of the node stations are 151.128.8.xxx

Fist returns the correct NSAPs

The history is adding mesh to node 1 then merging node 2

We can ping from each node to the mesh stations fine except.  One node station 
can not ping the MESH side of the ATS of the other node.  The other node can do 
this fine.

Thanks,
Shaun



NOTICE - This message and any attached files may contain information that is 
confidential, legally privileged or proprietary. It is intended only for use by 
the intended recipient. If you are not the intended recipient or the person 
responsible for delivering the message to the intended recipient, be advised 
that you have received this message in error. Any dissemination, copying, use 
or re-transmission of this message or attachment, or the disclosure of any 
information therein, is strictly forbidden. BlueScope Steel Limited does not 
represent or guarantee that this message or attachment is free of errors, virus 
or interference.

If you have received this message in error please notify the sender immediately 
and delete the message. Any views expressed in this email are not necessarily 
the views of BlueScope Steel Limited.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: