Well that did not work Node 1 NSAP is I0001 node 2 is I0102 Node 2's IP addresses start at 16.129 Now both nodes can ping the opposite ATS mesh IP address but nothing on the opposite node Re my other question to the list we havent eliminated the switch configuration but its unlikley Shaun -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Boulay, Russ Sent: Friday, 9 October 2009 13:03 To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] IP Communications node-mesh-node To make this work now...the Node with 001 can stay... The one with 002 needs to become 102 ...as well as it's ATS Can't have 001 and 101 co-exists NOTICE - This message and any attached files may contain information that is confidential, legally privileged or proprietary. It is intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error. Any dissemination, copying, use or re-transmission of this message or attachment, or the disclosure of any information therein, is strictly forbidden. BlueScope Steel Limited does not represent or guarantee that this message or attachment is free of errors, virus or interference. If you have received this message in error please notify the sender immediately and delete the message. Any views expressed in this email are not necessarily the views of BlueScope Steel Limited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave