Hopefully this ASCII representation will work. Two separate nodes joined by two separate ATSes with a single mesh Node 1----ATS----MESH----ATS----Node 2 | | P91 The strange thing is omget/select all work only the IP commands fail to work. Shaun -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Lowell, Timothy Sent: Friday, 9 October 2009 09:48 To: 'foxboro@xxxxxxxxxxxxx' Subject: Re: [foxboro] IP Communications node-mesh-node Shaun, I'm not sure what you mean by merging two V6 nodes into a V8 mesh in a test lab. You have two entire nodes in a test lab? I have a test lab with one P92 at v8.2 and one SunBlade 1500 at 7.1, with a single Mesh switch connecting them. The SunBlade is going through a NCNI and RCNI and there is an ATS that connects to the Mesh switch. The P92 and an associated FCP270 go directly to the switch, of course. All IP communications work between the two hosts - ping, telnet, ftp, etc. I am using the Mesh for this traffic because I don't have a switch to connect the 3rd ethernet ports. It's just a test lab anyway, so there is no danger if the Mesh switch chokes on the traffic. I regularly ftp files back and forth, use VNC, and I've even been successfully testing rexec and rsh lately. What does your setup look like? Tim Lowell Control Systems Engineer Tesoro Companies, Inc. 210-626-4929 (w) 210-253-0225 (c) Timothy.Lowell@xxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Goldie, Shaun S Sent: Thursday, October 08, 2009 3:32 PM To: 'foxboro@xxxxxxxxxxxxx' Subject: [foxboro] IP Communications node-mesh-node Hi List In our test lab we have merged two V6 nodes into a V8 mesh IP communications does not work between the nodes (telnet/ping/ftp...) What should work / not work Shaun _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave NOTICE - This message and any attached files may contain information that is confidential, legally privileged or proprietary. It is intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error. Any dissemination, copying, use or re-transmission of this message or attachment, or the disclosure of any information therein, is strictly forbidden. BlueScope Steel Limited does not represent or guarantee that this message or attachment is free of errors, virus or interference. If you have received this message in error please notify the sender immediately and delete the message. Any views expressed in this email are not necessarily the views of BlueScope Steel Limited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave