Re: [foxboro] IP Communications node-mesh-node

  • From: "Boulay, Russ" <russ.boulay@xxxxxxxxxxxxxxxx>
  • To: <foxboro@xxxxxxxxxxxxx>
  • Date: Thu, 8 Oct 2009 19:06:04 -0400

So that explains ATS NSAP's those OK
 
So it sounds like you started with two totally separate Nodes...both probably 
having NSAP of 001
Once merged, one of these Nodes had to give up their 001 NSAP...Thus 002
 
So now, I'm wondering if you have stumbled into mutlinode system expecting the 
One mhundeths digit in the NSAP like 101 and 102 ...
 
So I would have to believe your Node with 001 works fine but Node with 002 
doesn't.
The IP address series of 151.128.8.129 and above is not expected on I/A
 
Anything beyond 151.128.8.128 usually jumps to the .16.129 
________________________________

From: foxboro-bounce@xxxxxxxxxxxxx on behalf of Redmond, Sean S
Sent: Thu 10/8/2009 6:44 PM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Re: [foxboro] IP Communications node-mesh-node



Our First Node is K* it is node one, we then merged in M* node node.  K0ATS1 is 
the ATS for node one, M0ATS1 is the ATS for node 2.
Info from IIF.prm
K0AW01 OS6AW1 ADRNSP 001 000001
M0AP01 OS6FS1 ADRNSP 001 000002


IMAW01 IMAW01 OS7AW1 ADRNSP 001 000000
IMAW01 K0ATS1 OS1A70 ADRNSP 001 000001
IMAW01 M0ATS1 OS1A70 ADRNSP 001 000002

-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Boulay, Russ
Sent: Friday, 9 October 2009 11:27 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] IP Communications node-mesh-node

those nacs are universal for anything in LI Mode..

Your ATS NSAPs don't look right ....what are your Node NSAP's
________________________________




NOTICE - This message and any attached files may contain information that is 
confidential, legally privileged or proprietary. It is intended only for use by 
the intended recipient. If you are not the intended recipient or the person 
responsible for delivering the message to the intended recipient, be advised 
that you have received this message in error. Any dissemination, copying, use 
or re-transmission of this message or attachment, or the disclosure of any 
information therein, is strictly forbidden. BlueScope Steel Limited does not 
represent or guarantee that this message or attachment is free of errors, virus 
or interference.

If you have received this message in error please notify the sender immediately 
and delete the message. Any views expressed in this email are not necessarily 
the views of BlueScope Steel Limited.


_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave






*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys plc, which is a company registered in England and 
Wales with its registered office at Portland House, Bressenden Place, London, 
SW1E 5BF (Registered number 166023). For a list of European legal entities 
within the Invensys Group, please go to 
http://www.invensys.com/legal/default.asp?top_nav_idw&nav_id?&prev_idw. You may 
contact Invensys plc on +44 (0)20 7821 3848 or e-mail 
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be 
subject to the terms of any agreements between Invensys (and/or its 
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and 
affiliates).


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  1. Home
  2. foxboro
  3. Archive
  4. 10-2009