[duxuser] Re: embosser puts dots at top of braille page when embossing
- From: "John Sanders" <jmtsanders@xxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sat, 29 May 2004 23:04:30 -0400
Hi my name is John sanders. Oh ok.
I have a question: I'm currently in high school. and I usually use dux bury for
doing homework assignments. Are there any codes that you could recommend me use
for making my dux bury Braille document look more creative?
Sincerely,
John Sanders
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Friday, May 28, 2004 7:03 PM
Subject: [duxuser] Re: embosser puts dots at top of braille page when
embossing
Hi John,
The first thing to check is that in BIOS, your LPT port is set to SPP or
Standard Serial Port.
Now I am afraid this is not going to sound good, but I'm afraid you will have
to get someone locally to assist you in getting into the BIOS and checking, and
perhaps changing, this. It cannot usually be done by a visually impaired
person, and does require someone who knows about BIOS. Perhaps your computer
supplier can help if they are local to you.
George Bell.
------------------------------------------------------------------------------
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of John Sanders
Sent: 28 May 2004 22:55
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] embosser puts dots at top of braille page when embossing
Hi every one, for some strange reason, my emboser puts wierd letters at the
top of my braille document. How should i go about fixing this?
I am using a braille blazer embosser and dux bury version 10.
I hope this helps you a little.
Sincerely,
John Sanders
Other related posts:
