In BP Transfer options, when I hit the firmware or the software update buttons, the repsonse dialog box says no updates available. So what need I do to get the version 2.1.0.25 in my system? Rik -----Original Message----- From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx] On Behalf Of Brian Buhrow Sent: Monday, February 13, 2006 4:02 PM To: bookport@xxxxxxxxxxxxx Subject: [bookport] Re: BP Launcher does not launch! That's your problem. The latest beta is 2.1.0.25 Try updating your firmware, using one of your older cards, and then using your new card. -Brian On Feb 13, 3:54pm, "Rik James" wrote: } Subject: [bookport] Re: BP Launcher does not launch! } My firmware version is curretnly 2.1.0.8, and I did as you suggested, } reformatting the card while in the Bookport. When I connected it then to the } USB, a modern miracle took place. Those sweet tones chimed the pretty } little tune, and the BP Launcher started up and the status says 3.8 GB. So } I guess I am now good to go. } } Thank you very kindly for the help! } } Rik } } -----Original Message----- } From: bookport-bounce@xxxxxxxxxxxxx [mailto:bookport-bounce@xxxxxxxxxxxxx] } On Behalf Of David Allen } Sent: Monday, February 13, 2006 3:37 PM } To: bookport@xxxxxxxxxxxxx } Subject: [bookport] Re: BP Launcher does not launch! } } Hi Rick and list: } } Since you haven't formatted the new card, try formatting it in the book } port. To do this, press the four corner keys, 1, 3, D and F simultaneously. } Press all four again to confirm. Then the card is ready for loading data. } } Cheers, } Dave } ----- Original Message ----- } From: "Rik James" <d28rik@xxxxxxx> } To: <bookport@xxxxxxxxxxxxx> } Sent: Tuesday, February 14, 2006 11:19 AM } Subject: [bookport] BP Launcher does not launch! } } } > Oh my oh please tell me I did not just do a bad thing! } > } > I just bought a SanDisk 4 GB flash memory card to use on my Bookport. } > } > When I put it in, Bookport says firmware number and ready like normal. } > Then it says there are no files. } > } > So I hook it up to USB port figuring it will launch and load the software. } > I think that is how it has worked before. I have about 4 or 5 other cards } > by now and they have all worked fine. But this one is the biggest size } > being 4 Gigs. The 2 I have has worked. } > } > My battery level is 43 percent. The time setting still works. } > } > Can anyone tell me what to do? } > Am I gonna be sorry I bought the 4 GB? } > } > Can you jump start it by putting the software in bookport using Windows } > Explorer? If so, which file is it? I am not going to do anything that } > will risk messing up my good time with the Bookport! } > } > Thanks. } > Rik } > } > } } } >-- End of excerpt from "Rik James"