[bookport] Re: BP Launcher does not launch!

  • From: "David Allen" <wd8ldy@xxxxxxxxxx>
  • To: <bookport@xxxxxxxxxxxxx>
  • Date: Tue, 14 Feb 2006 11:36:32 +1300

Hi Rick and list:

Since you haven't formatted the new card, try formatting it in the book port. To do this, press the four corner keys, 1, 3, D and F simultaneously. Press all four again to confirm. Then the card is ready for loading data.

Cheers,
Dave
----- Original Message ----- From: "Rik James" <d28rik@xxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Tuesday, February 14, 2006 11:19 AM
Subject: [bookport] BP Launcher does not launch!



Oh my oh please tell me I did not just do a bad thing!

I just bought a SanDisk 4 GB flash memory card to use on my Bookport.

When I put it in, Bookport says firmware number and ready like normal.
Then it says there are no files.

So I hook it up to USB port figuring it will launch and load the software.
I think that is how it has worked before.  I have about 4 or 5 other cards
by now and they have all worked fine.  But this one is the biggest size
being 4 Gigs.  The 2 I have has worked.

My battery level is 43 percent.  The time setting still works.

Can anyone tell me what to do?
Am I gonna be sorry I bought the 4 GB?

Can you jump start it by putting the software in bookport using Windows
Explorer?  If so, which file is it?   I am not going to do anything that
will risk messing up my good time with the Bookport!

Thanks.
Rik




Other related posts: