It shouldn't change if you have saved the settings, which it sounds like you have. Lori From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Roger Loran Bailey (Redacted sender "rogerbailey81@xxxxxxx" for DMARC) Sent: Wednesday, August 13, 2014 6:32 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] Re: Paragraph problems in open book version 9 I just followed your instructions myself and found the most accurate recognition strategy already selected. I don't think that I am having that problem with the book I am working on right now, but, like I said, another book might come along and the paragraph breaks will be missing again. Could that setting change on its own from book to book? I wouldn't think so. On 8/13/2014 9:17 PM, Lori Castner wrote: Hi, Larry, I had this problem at first, but when I contacted Freedom Scientific I received the following information, and it did solve the problem except for one book. I do not scan much for submission but have scanned two abooks which were accepted by Bookshare and contained all the paragraph breaks. Try using a different stradegy with the instructions below: While in the OpenBook(tm) scanning and reading software 1. Pull up the settings menu "alt+g" 2. Arrow down to work flow settings and hit enter 3. Tab over to work flow modify... button and hit enter 4. Perform the control+tab command to get to the process page 5. You should be positioned on: recognition, use default recognition. If this item is checked here, press the spacebar to uncheck this item 6. Tab to: recognition stradegy 7. Use your arrow keys to select: most accurate and hit enter Maybe this will work for you; I certainly hope so. Lori C. 8. Tab to okay and hit enter From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Larry Lumpkin Sent: Wednesday, August 13, 2014 5:22 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] Paragraph problems in open book version 9 Hello. I have attempted to scan several books for Bookshare using open book version 9 and they are being rejected because of no paragraph indicators. Has anyone experienced this issue and how did you solve it? Thanks.