[bksvol-discuss] Re: Paragraph problems in open book version 9
- From: "Lori Castner" <loralee.castner@xxxxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Thu, 14 Aug 2014 09:45:32 -0700
I have never gotten that "re-recognize" feature to work; in fact, it has
destroyed the scanned books.
Lori
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Larry Lumpkin
Sent: Wednesday, August 13, 2014 6:21 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: Paragraph problems in open book version 9
Thanks Lori. Those are great instructions. I'm keeping them safe. Thank I
can get it to re-recognize an already scanned book?
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Lori Castner
Sent: Wednesday, August 13, 2014 8:17 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: Paragraph problems in open book version 9
Hi, Larry,
I had this problem at first, but when I contacted Freedom Scientific I
received the following information, and it did solve the problem except for
one book.
I do not scan much for submission but have scanned two abooks which were
accepted by Bookshare and contained all the paragraph breaks.
Try using a different stradegy with the instructions below:
While in the OpenBook(tm) scanning and reading software
1. Pull up the settings menu "alt+g"
2. Arrow down to work flow settings and hit enter
3. Tab over to work flow modify... button and hit enter
4. Perform the control+tab command to get to the process page
5. You should be positioned on: recognition, use default recognition. If
this item
is checked here, press the spacebar to uncheck this item
6. Tab to: recognition stradegy
7. Use your arrow keys to select: most accurate and hit enter
Maybe this will work for you; I certainly hope so.
Lori C.
8. Tab to okay and hit enter
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Larry Lumpkin
Sent: Wednesday, August 13, 2014 5:22 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Paragraph problems in open book version 9
Hello. I have attempted to scan several books for Bookshare using open book
version 9 and they are being rejected because of no paragraph indicators.
Has anyone experienced this issue and how did you solve it? Thanks.
Other related posts:
