In message <4825AA9C.7030405@xxxxxxxx> Clive Bonsall <cbonsall@xxxxxxx> wrote: > 1. I could not reinstall AW2.7 from the original CD ... I had to copy it > across from a copy of the VRPC hard disk image which I made prior to > reinstalling Windows. Why? What do you mean by "could not"? > 2. When I first run AW after switching on the PC and starting up VRPC, > the AW boot sequence gets as far as "Group" and then hangs and renders > VRPC unusable ... the only recourse seems to be alt-enter followed by > quit VRPC from the top menu (difficult because the PC has slowed to a > crawl by then). I then re-run VRPC which tells me it wasn't closed down > properly. So, I shut it down from the iconbar, and then re-run it. At > that point, running AW2 will normally succeed. I suggest reinstalling ArtWorks from CD. Regards, Martin -- --------------------------------------------------------------------- Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx --------------------------------------------------------------------- ------------------------------------------------------------ To change, suspend or cancel your subscription go to //www.freelists.org/list/artworks ------------------------------------------------------------