[amayausers] Re: Dead in the water

  • From: Jo Leftwich <leftwichjo@xxxxxxxxx>
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Sun, 21 May 2006 12:18:25 -0700 (PDT)

Steve, I've been at this learning curve for two years
and I still put the needle in backwards, forget to
check the presser foot height and forget to check the
bobbin BEFORE I start the hat! LOL

--- Steve Griswold <stevegriswold@xxxxxxxxx> wrote:

> Hi, Jo,
> I think that is my issue.  I still have to check
> that Amaya, but it was late and I bet I put the
> needle in backwards.  Actually I hope that is what
> it is so I can easily fix it.
> 
> Other bone head first time user mistakes:
>    
>   1. Bring only one of your Amaya machines to a
> trade show with your ethernet cable.  After 2.5
> hours I learned you need a crossover cable to get
> only one machine to come up.  Ethernet works if you
> have more than one machine and your hub.  So a quick
> trip to Office Depo, and a cross over cable later
> fixed that.
> 
> 2. Doing anything with Hats within your first two
> weeks.
> 
> 
>   Thanks,
>   Steve
> 
> 
>   
> Jo Leftwich <leftwichjo@xxxxxxxxx> wrote:
>   Steve,I had the same symptoms and finally
> discovered
> the needle in backwards.
> 
> --- Steve Griswold wrote:
> 
> > Hi,
> > 2 hours and still can not get my Amaya to sew more
> > than 3 seconds.
> > 
> > Here are my stats:
> > 
> > Machine: 2 weeks old Amaya XT.
> > Designs: Has done maybe 4-5 all with thread
> breaks,
> > bobbin breaks, needle breaks.
> > Material: Polo shirt with two layers of backing in
> > 5.25" hoop
> > 
> > Issue:
> > Tried Needle head #1, sews maybe 5 seconds and
> > thread or bobbin break.
> > After this happened about 10 times the needle
> broke.
> > replaced needle. now the tread just comes out of
> > the needle hole. Does not seem to catch the
> bobbin.
> > Tried playing with the bobbin tension, replaced
> > bobbin tread with new bobbin, and no luck.
> > 
> > Tried needle head #8, same issue, bobbin and
> thread
> > breaks, then after maybe 8 times the needle broke.
> 
> > 
> > Tried: 
> > Replaced Thread (New ARC thread poly)
> > Replaced needles (1 and 8) and turn 5 degrees to
> > the right. (75/11 BP in all slots)
> > Checked tread path
> > Put in new bobbin
> > Cleaned bobbin case
> > Adjusted bobbin tension, (looser, slightly
> > tighter) instead bobbin until it clicked and left
> 2"
> > of bobbin hanging out to the right. Looks like a
> > spider slowing going down if you hold it in your
> > hand. placed in so it looks like a #9 and unwinds
> > clockwise.
> > 
> > Adjusted pressure foot (3 up from all the way
> down,
> > it is just a hair about the shirt fabric)
> > Centered needle- removed needle plate, centered
> > and tighted.
> > Oiled hook and spun.
> > Blew out the need hook area, checked for thread
> > mess.
> > ActiFeed set to 5 and also tried 6
> > 
> > Any ideas?
> > 
> > Thanks,
> > Steve
> > Atlanta GA
> > 
> > 
> > 
> > 
> > 
> > 
> > ---------------------------------
> > Ring'em or ping'em. Make PC-to-phone calls as low
> > as 1¢/min with Yahoo! Messenger with Voice.
> > 
> >
>
===========================================================
> > 
> > 
> > The AmayaUsers Mailing List
> > Website: http://www.amayausers.com
> > Discussion Board: http://www.amayausers.com/boards
> > Subscribe/Unsubscribe:
> > http://www.amayausers.com/list
> > 
> >
>
===========================================================
> > 
> > 
> 
> 
> Jo
> Just Sew It Custom Embroidery
> Delta, Colorado
> 
> 970-874-7899
>
===========================================================
> 
> 
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe:
> http://www.amayausers.com/list
> 
>
===========================================================
> 
> 
> 
>               
> ---------------------------------
> Feel free to call! Free PC-to-PC calls. Low rates on
> PC-to-Phone.  Get Yahoo! Messenger with Voice
> 
>
===========================================================
> 
> 
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe:
> http://www.amayausers.com/list
> 
>
===========================================================
> 
> 


Jo
Just Sew It Custom Embroidery
Delta, Colorado
<www.justsewitllc.com>
970-874-7899
=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: